14
1313 Handheld Programmer Manual, Rev. B
Be aware that as you change parameter settings, the new values replace the earlier
values. If you make adjustments that you don’t like, and wish you could return
to the earlier values, you cannot do this—unless you have written down those
earlier settings (which is unlikely) or unless you have saved them.
To save your parameter settings, use the “Save .cpf File” function in the
Programming menu; see Section 8. Your parameter settings will then be saved
in a .cpf file.
You can save as many .cpf files as you desire, and you can create unique
names for them. If you prefer, each .cpf can automatically be given a name
consisting of the date and time when it was created; see the “Text for save as”
item in the HHP menu (Section 10).
For information on creating names, see Section 13: Using the Keyboard.
5 — PARAMETERS MENU
To Next Page
Loading...
Need help?
General
