Custo Med Ergometer ec3000 - Page 11

Ergometer
ec
3000
General
2
-
5
The following diagram shows the operating states and the required events, which are
required for the transition between t
he individual states.
The starting sequence is cycled through at first after the ergometer has been switched
on. This starting sequence includes all internal processes, which are required to
accomplish an operational state.
The state „IDLE“ indicates the
so
-
called main menu. The ergometer is in this state, if it is
not operated. Arising from this state all operational functions can be accomplished
–
the
ergometer also returns again to this state after the operational functions have been
finished.
This fu
nctions include:

Manual operation
( Manual )

Remote operation
( Remote )

Program environment
o
Program selection
( PGM
-
Sel )
o
Program execution
( PGM
-
Ex
–
program runs )
PGM
-
Sus
–
program interrupted )
o
Programming
( PGM
-
Def )

Device settings
( Servic
e )
The diagram also displays particularly the actions, which are required for the carrying out
of operational functions.