Custo Med Ergometer ec3000 - Power Supply

Interfaces
Ergomete
r
ec
3000
11
-
2
11.2.
Power supply
The connection of the power supply is done by cold device connection:
Function
Specification
Notes
Inpu
t voltage AC
85 V ... 264 V AC
47 Hz ... 440 Hz
Fuse
2 x 1.6 A slow
-
blow
The device is switched on with the power switch. The switched
-
on state can be
recognized by the glowing displays of the ergometer head.
Safety instructions:

The power
supply plug must be pulled out absolutely before the fuse is being
replaced.

Only fuses of this type must be used.