Custo Med Ergometer ec3000 - Execution of the Program; Start of the Training Program

Ergometer ec
3000
Training programs
5
-
9
5.3.
Execution of the program
5.3.1.
Start of the training
program
By pressing the key „START/PAUSE“ a selected program is being executed in the
operating mode „program selection“.
START
PAUSE
The operating state „program execution“ of the ergometer can be verified by the
following criteri
a:

The program number is displayed permanently
( no flashing ).

The program type is displayed with „INFO“.

The time indication runs backwards ( second cycle ).
This example shows a
pulse steady state program with a heart rate of 120 beats/minute
as program no. 3.
Note:
A pulse measuring (ECG or polar belt) is a basic requirement for the use of PSST
programs.