Custo Med Ergometer ec3000 - 8 Operating Mode Control Suction System; Selection of the Suction System Control

Ergometer ec
3000
Option suction system
8
-
1
8.
Operating mode control suction system
8.1.
Selection of the suction system control
The setting of the suction rate can be carried out any time. By pressing the key
the operating function „suction system control“ is invoked.
T
he operating function can be recognized by the word „
-
P“ in the „INFO“ field, followed
by a number which indicates the current suction rate on a scale from 0 to 5. The number
1 indicates the lowest setting
–
the number 9 the highest setting.
By invoking this function the previously selected level of the suction rate is displayed. In
this example it is an average level ( level 3 ).
Notes:

At first the previously set suction rate is set again.

When the setting of the su
ction intensity is „
-
P0“, the suction system is switched
off.

If within 10 sec there is no entry made, the system returns to the previous
operating level.