CWT GFM A0A0161 - Sensor Specifications; Models

2
1.5 Sensor Specifications
Measurement Range
5 - 255 CFH (2 - 120 LPM)
Display Resolution
±1 CFH (± 1 LPM)
Accuracy
±3 % of full-scale ±1 digit
Operating Pressure
50-PSI maximum (344 KPA)
Fault Relay Output
Opto-Isolated Solid State Relay (N.O. Contacts)
Relay Rating
48 vac @ 0.5 amps non-inductive
48 vdc @ 1.0 amps non-inductive
Analog Sensor Output
0 - 2.55 vdc @ 10 ma.
Analog Scaling
0.01 vdc = 1 CFH (0.01 V = 1 LPM)
Power Requirement
12 - 28 vdc @ 100 ma.
Operating Temperature
20° to 140° F (-7° to 60° C)
Battery Charger
120 vac 60 hz @ 300 ma (220 VAC 50 hz @ 300 ma)
Battery Life
Approximately 24 hours with full charge
(User configurable English / Metric units of measurement)
Note: Specifications subject to change without notification.
1.6 Models
The following models are covered in this document:
Part No.
Description
A0A0161
120/240 VAC Portable GFM System
A0A0162
120/240 VAC In-Line GFM System
A0A0163
ADM III™ GFM™ System
A0A0164
ADM IV™ GFM™ System
A0A0165
WDL II™ GFM System