CWT GFM A0A0161 - Reset Log Mode Volume

12
6.4 Reset Log mode volume
To reset the Log mode volume press both “▼” and "▲" switch simultaneously to
enter the “Select Para INC/DEC” mode. The first programmable parameter will
appear on the display. To increment through the program menus press the “▲”
button. To decrement through the menus press the “▼” button. Until the “Reset
Volume?” option is displayed. To edit a menu option press both “▼” and "▲" switch
simultaneously to enter the “Edit Para INC/DEC” mode. To toggle the option to
“Yes” presses the “▲” button. To end the “Edit Para INC/DEC” press both “▼”
and "▲" switch simultaneously to exit and return to the normal display mode. The
“Tot Volume = 0.0” will be reset to zero.