CyberPower CP900EPFCLCD User Manual

5
5. Plug the UPS into a 2 pole, 3 wire grounded receptacle (wall outlet). Make sure the wall branch outlet
is protected by a fuse or circuit breaker and does not service equipment with large electrical
demands (e.g. air conditioner, refrigerator, copier, etc. Avoid using extension cords.
6. Depress the power switch to turn the unit on. The power on indicator light will illuminate and the unit
will "beep".
7. If an overload is detected, an audible alarm will sound and the unit will emit one long beep. To
correct this, turn the UPS off and unplug at least one piece of equipment from the battery power
supplied outlets. Wait 10 seconds. Make sure the circuit breaker is depressed and then turn the UPS
on.
8. Your UPS is equipped with an auto-charge feature. When the UPS is plugged into an AC outlet, the
battery will automatically recharge.
9. To maintain optimal battery charge, leave the UPS plugged into an AC outlet at all times.
10. To store your UPS for an extended period, cover it and store with the battery fully charged.
Recharge the battery every three months to ensure battery life.
CYBERPOWER GREENPOWER UPS™ TECHNOLOGY
CyberPower’s Green Commitment
CyberPower is dedicated to the development of green products, and has adopted
Green practices throughout its business, including: membership in Climate Savers
Computing Initiative (CSCI), accordance with the Restriction on Hazardous
Substances (RoHS), Waste Electrical and Electronic Equipment (WEEE) protocols,
as well as ISO 14001 and IECQ QC080000. CyberPower pledges to provide the
advanced energy solution for the environment and become a leading eco-friendly
organization in the UPS industry.
Reduce Energy Cost with GreenPower UPS
TM
Technology
CyberPower’s goal is not only to provide eco-friendly products but also to bring the best value for
consumers. The advanced energy-saving design improves the operating efficiency and eliminates
waste energy consumption. As a result, consumers will enjoy significant energy cost savings with the
adoption of GreenPower UPS
TM
technology.
BATTERY REPLACEMENT
CAUTION! Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servicing the
battery. Service the battery under the supervision of personnel knowledgeable of
batteries and their precautions.
CAUTION! Use only the specified type of battery. See your dealer for replacement batteries.
CAUTION! The battery may present the risk of electrical shock. Do not dispose of batteries in
a fire, as they may explode. Follow all local ordinances regarding proper disposal of batteries.
CAUTION! Do not open or mutilate the batteries. Released electrolyte is harmful to the skin
and eyes and may be toxic.
CAUTION! A battery can present a high risk of short circuit current and electrical shock. Take
the following precautions before replacing the battery:
1. Remove all watches, rings or other metal objects.
2. Only use tools with insulated handles.

CyberPower CP900EPFCLCD Specifications

General

Waveform	Pure sine
Output power	540 W
UPS topology	Standby (Offline)
Input frequency	50/60 Hz
Maximum current	10 A
Surge protection	Yes
Country of origin	China
Audible alarm modes	Alarm when on battery, Low battery alarm, Overload alarm
Surge energy rating	405 J
Output power capacity	0.9 kVA
Power protection features	Over power, Over voltage, Overload, Short circuit
Surge protection features	Fax, Modem, Network, Telephone
Input operation voltage (max)	270 V
Input operation voltage (min)	170 V
Output voltage Total Harmonic Distortion (THD)	10 %
Interface	USB
Nominal input voltage	165-265 V
Nominal output voltage	230 V
Operating temperature (T-T)	32 - 104 °F
Compatible operating systems	Windows 7/Vista/XP/2000/Server 2003, Linux
Suitable for use in country/location	Europe
Power plug	C14 coupler
AC outlets quantity	6 AC outlet(s)
Modem (RJ-11) ports	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Form factor	Tower
Cable length	1.83 m
Display type	LCD
Certification	CE, EAC, RCM
Product color	Black
LED indicators	Operation
Housing material	Plastic
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 15000 m
Storage temperature (T-T)	15 - 45 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	8504408590
Battery technology	Sealed Lead Acid (VRLA)
Battery recharge time	8 h
Typical backup time at full load	1 min
Typical backup time at half load	7 min

Weight and Dimensions

Depth	230 mm
Width	100 mm
Height	275 mm
Weight	6600 g
Package depth	365 mm
Package width	195 mm
Package height	335 mm
Package weight	7800 g