CyberPower CPS1000E - Technical Specifications

12
The unit is not
connected to an AC
outlet.
The unit must be connected to a
220/230/240V outlet.
The battery is worn
out.
Contact CyberPower Systems about
replacement batteries.
Mechanical problem.
Contact CyberPower Systems via phone or
visit our website at www.cpsww.eu.
TECHNICAL SPECIFICATIONS
Model CPS1000E
Capacity (VA) 1000VA
Capacity (Watts) 700W
Operation Technology AVR ( Double Boost & Single Buck )
AC Input
Input Voltage Range 140Vac – 300Vac
Input Frequency Range 45~65Hz (auto sensing)
AC Output
Number of Phase Single Phase
On Battery Typical
Output Voltage
0 ~40% LOAD Pure Sine Wave at 230 Vac +/- 5
%
40~100% LOAD Trapezoidal Wave at 230 Vac+/- 5%
Nominal Output
Voltage Configuration
Note
Configurable for 220 / 230 / 240Vac
On Battery Output
Frequency
50 / 60 Hz +/- 1%
Overload Protection
On Utility: Circuit Breaker
On Battery: Internal Current Limiting
Transfer Time < 10 ms ( Typical )
Output Receptacles Schuko Type * 2
External Battery
Voltage x
Recommended Rating
x Quantity
12V x 100Ah x 1
External Battery Rating 12V
External Battery Type Sealed Maintenance Free Lead Acid Battery
External Battery
Protection
Fuse & Relay
Hot Swappable
External Battery
Yes
Status Indication
Indicators Power On, LCD Display
Audible Alarms On Battery, Low Battery, Overload