CYBEX 625T - Page 180

2. Remove the four screws securing the display board to the console assembly using a Phillips
screwdriver.
Qty.DescriptionItem
1Console Assembly1
1Display Board Connector2
1Display Board3
4Display Board Screw4
Install display board
1. Install the four screws securing the display board to the console assembly using a Phillips screwdriver.
Qty.DescriptionItem
1Console Assembly1
1Display Board Connector2
1Display Board3
4Display Board Screw4
2. Connect the display board cable to the MCC board connector (J16).
Install back cover
Install the four screws securing the back cover to the console assembly using a Phillips screwdriver.
Page 180 of 209
Cybex 625T Treadmill Part Number