The E3 View Monitor is supplied with a power cord,
Use Cybex supplied AC power kit only. Consult an electrician with any questions.
Verify the unit is connected to an outlet having the same configuration as the plug.
Verify connection is a grounded circuit. Do not use a ground-plug adapter to adapt the 3-prong power
cord to a non-grounded electrical outlet.
Verify power supply is compliant with local building codes.
Assembly Procedure 771A/772A
Two people will be required for this procedure.
Read and understand all instructions thoroughly before assembling this unit. Check all items
carefully. If there is damage, see the Customer Service section of this manual for proper procedure
to return, replace, or reorder parts.
The words "left" and "right" denote the user's orientation.
Verify you have received the correct package
1. Read box label to verify the model number and voltage (optional) match what was ordered.
2. Verify paint color matches what was ordered.
Verify parts list shown below
DescriptionPart NumberQuantityItem
Base assemblyVaries11
Console assemblyVaries12
Foot pad12090-32223
Handle, Right-14
Handle, Left-15
Base, Accessory tray770A-31616
Cover, Top, Accessory tray770A-31717
Cover, Bottom, Accessory tray770A-31818
Cover, Rear, Top, Right770A-32219
Cover, Rear, Outer, Right770A-323110
Cover, Rear, Inner, Right770A-324111
Cover, Rear, Top, Left770A-319112
Cover, Rear, Inner, Left770A-321113
Cover, Rear, Outer, Left770A-320114
Hardware pack-115
Owner’s Manual5771-X116
Page 14 of 95
Cybex 771A/771AT, 772A/772AT Arc Trainer Part Number 5771-4 K
To Next Page
Loading...
Need help?
General
