Safety
Safety Guidelines and Practices
Read the Owner’s Manual carefully before assembling, servicing, or using the equipment. Owner
must comply with all safety guidelines in this manual. It is also the owner’s responsibility to instruct
users on the safe and proper operation of the equipment and to properly display any and all
warning labels and instructional placards. All users should read these labels and placards before
using equipment.
Serious injury or death could occur if the following safety precautions and
instructions are not followed.
Power Cord Information
Shock and electrocution hazard.
• Connect unit to a grounded outlet.
• Do not use voltage adapter or extension cord.
Cybex is not responsible for injuries or damages as a result of cord or plug
modification.
• Verify voltage requirements of unit match local voltage requirements.
• Verify unit outlet is the same configuration as the plug.
Power cord configuration
NEMA 5-15115 VAC
CEE 7/7Euro Plug
BS 1363UK 230 VAC
JIS 8303Japanese
107-2-D1Danish
AS/NZS 3112Australia
Page 4 of 95
Cybex 771A/771AT, 772A/772AT Arc Trainer Part Number 5771-4 K
To Next Page
Loading...
Need help?
General
