EasyManua.ls Logo

CYBEX Cloud Q - Adjusting the Infant Carrier Seat; No Rethread Harness Adjustment; Infant Insert Usage

CYBEX Cloud Q
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Pull up on Harness Straps to snug around the child's hips while holding
the Harness Buckle in place.
7. Slowly pull the adjuster strap to tighten the Shoulder Straps. A snug
strap should not allow any slack. It lies in a relatively straight line without
sagging. It does not press on the child’s flesh or push the child’s body
into an unnatural position.
8. Harness Pinch Test. To test for a properly tightened Har
ness, pinch
the shoulder strap. A snug Harness should not allow you to pinch any
slack when pinched between your thumb and forefinger. If needed, pull
adjuster strap further for a tight and proper fit.
19
8
7
6
CAUTION, A LOOSE HARNESS IS DANGEROUS
Always keep child properly secured in Harness.
Never secure child in Infant Carrier dressed in a
bulky garment or heavy clothing.
An infant could be ejected and killed if wrapped in
a blanket or swaddled. Make sure infant’s arms and
infant’s legs are not bound or wrapped together.
To keep child warm, place a blanket over child and Infant Carrier, AFTER you have
properly secured and tightened Harness around your child.
WARNING: DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR
USING THE INFANT CARRIER - SECURING THE CHILD (Continued)

Other manuals for CYBEX Cloud Q

Related product manuals