CYBEX Cloud Q Manual

ADJUSTING THE RECLINE POSITION
A new function of the Cloud Q is that it can be reclined to
an almost horizontal position outside of the car. With an
extended leg-rest and a fully reclined backrest, the child
can lie comfortably and in an ergonomically correct position.
The recline angle can be adjusted easily with one hand
without having to take the child out of the carrier, and the
handle remains in the carrying position for easier mobility.
1. While holding one hand on the handle, simply squeeze
the Recline Release Handle and push the seatback
down until it locks into the full recline position.
2. To get back to Car Seat Mode simply squeeze the
Recline Relase Handle and lift backrest up until it locks
into the upright position.
Combined with the CYBEX Priam and M-strollers the Cloud Q
becomes a both striking and very practical travel system.
20
The CYBEX CLOUD Q must only be reclined outside of the vehicle.
NEVER INSTALL this child restraint in a vehicle when the carrier is in the reclined position.
USING THE INFANT CARRIER OUTSIDE OF THE VEHICLE
CAR SEAT MODE
RECLINED MODE
2
1

CYBEX Cloud Q Specifications

General

Certification	ECE R-44/04, Supplement 7
Mounting type	ISOFIX
Product color	Gold
Car seat group	0+ (0 - 13 kg; 0 - 15 months)
Adjustable backrest	Yes
Belt fastening type	5-point

Weight and Dimensions

Depth	665 mm
Width	440 mm
Weight	5400 g
Height (max)	570 mm
Height (min)	403 mm