CYBEX Cloud Q Manual

ATTACHING INFANT CARRIER TO BASE IN THE CAR (Continued)
4. Unroll the Tether Loop from the Tether Loop Storage
Pocket and place it around the Infant Carrier.
5. Connect the Tether Loop with the Attachment Hook.
6. Adjust the top tether strap by pulling to remove
all slack in the straps. Do not over tighten. Roll up
excess strap and place into the storage pocket
attached to the top tether.
25
4
6
Always secure the loose end of the
top tether strap to prevent it hanging
out of the car or being accessible
by the child
Pull to
remove
slack
This child restraint is not approved
for use with any connectors that
connect to the car’s ISOFIX low
anchorages.
CAUTION: CHILDREN CAN BE INJURED OR RESTRAINTS AND TOP TETHER
STRAP DAMAGED BY UNSECURED CARGO IN A COLLISION. SECURE OR
REMOVE HAZARDOUS CARGO BEFORE USING THIS CHILD RESTRAINT.
OVERVIEW OF THE TOP TETHER STRAP
5

CYBEX Cloud Q Specifications

General

Certification	ECE R-44/04, Supplement 7
Mounting type	ISOFIX
Product color	Gold
Car seat group	0+ (0 - 13 kg; 0 - 15 months)
Adjustable backrest	Yes
Belt fastening type	5-point

Weight and Dimensions

Depth	665 mm
Width	440 mm
Weight	5400 g
Height (max)	570 mm
Height (min)	403 mm