CYBEX Free Weight - Assembly; Anchoring

Cybex Free Weight Owner’s Manual
Assembly
Page 5-1
5 - Assembly
Anchoring
Securely anchor each machine to the fl oor using the anchor holes provided in each machine.
Make sure that each machine is set up and operated on a solid level surface. Do not install
equipment on an uneven surface.
•
•
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a
professional contractor.
NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8” grade 2 bolts
or better).
NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any
leg or frame not in contact with surface using fl at washers.