15 of 29Fly6 CE603 User Guide |
LEDS Audio Alerts (Volume Dependant) Reason
N/A 4 rapid high pitched beeps 75% to <99% charged (only when turning on or off)
N/A 3 rapid high pitched beeps 50% to <75% charged (only when turning on or off)
N/A 2 rapid high pitched beeps 25% to <50% charged (only when turning on or off)
N/A 1 high pitched beep 12% to <25% charged (only when turning on or off)
N/A 3 long high pitched beeps Less than 12% charged (only when turning on or off)
See Home Safe Mode (on page 19) 1 long and 1 very long beep every 60 seconds Less than 12% charged (during use)
N/A 3 rapid beeps Incident Protection Mode triggered - See page 17
Tail light (as per options on page 13) N/A Keeps you visible
N/A Constant repeating ascending tone Alarm triggered
Audio settings
The Fly6 has a microphone which records sound
in high quality. It also has a speaker which is used
for audible alarms and alerts.
Volume levels
The audio volume of the speaker can be set from
off to 100%, in 20% increments (0-5).
The volume of the audio can be customised via
the CycliqPlus app on mobile or desktop.
Audible alerts
A recording alert notification can be set using the
CycliqPlus app. This provides a short beep at 3, 5,
or 10-minute intervals to notify you that your Fly6
is recording video footage. This is particularly
useful as you can’t see the rotating bezel whilst
riding. This alert can also be turned off and is
affected by your selected volume setting.
Airplane Mode
Airplane Mode turns off all device signals
rendering it compliant for airline travel, transport
and shipping.
To activate Airplane Mode the Fly6 must be
turned off, and then simultaneously press and
hold the power and Q button for 3-4 seconds.
Each side of the LED bezel will flash alternately
twice to confirm Airplane Mode is activated.
To Next Page
Loading...
