21 of 29Fly6 CE603 User Guide |
All Fly6 settings can be managed using the CycliqPlus mobile app -
available for iOS and Android.
Connecting to your mobile device
Your Fly6 uses Bluetooth for connection to your iOS or Android device. The
default setting is for Bluetooth to be on only when the Fly6 is powered on.
This is enabled to help conserve battery life, but can be changed to be always
on all under System configuration within the CycliqPlus app.
Connecting for the first time
The first time you connect your Fly6 to your mobile device you will need to
follow the below steps to enable Bluetooth.
1. Turn on your Fly6 by pressing and holding the power button.
2. Open the CycliqPlus mobile app and make sure Bluetooth is enabled on
your phone.
3. Select your Fly6 from the menu. The Fly6 bezel indicator light will
illuminate blue when connection is established.
Time and date settings
The Fly6 is automatically synced with the time and date information from
your smartphone when connecting to the CycliqPlus mobile app.
Note
You can also manually input the date and time via the CycliqPlus desktop app.
File lock warning
This triggers a pop up and audible alert on your CycliqPlus mobile app if
more than 50% of your microSD card is filled by locked video footage.
Tail light settings
This function allows you to select which light options will be available via the
power Button on your Fly6. (see page 13).
CycliqPlus mobile app
To Next Page
Loading...