Cyrus Two Installation Diagram
IN CASE OF TROUBLE
CYRUS I AND CYRUS II
THE POWER L.E.D. DOES NOT ILLUMINATE AND THERE IS NO SOUND
Check that the unit is plugged into the mains socket, and the power,
switch is ON.
Check the mains fuse.
AS ABOVE BUT THERE IS SOUND FROM THE SPEAKERS
The LE.D. is faulty.
SOUND FROM ONE SPEAKER ONLY
Check the fault does not occur on other inputs by listening to other
sources. If the fault persists then continue with the following. If not, the
To Next Page
Loading...
