The unit has been designed to be placed on the right hand side of your
Cyrus II or 767 LFAU, DO NOT position the PSX immediately above or
below the amplifier.
CONNECTIONS
Before making the connection between the PSX and your Cyrus II or 767
LFAU, first ensure that both units are switched OFF and disconnected from
the mains supply.
OPERATION
When the PSX has been added to your system, you will notice that the
power switch on your Cyrus II or 767 LFAU is ineffective in turning your
system on. The reason for this is, that the PSX is now in control of power
to the power amplifier section of that unit, and the On/Off switch on the
PSX unit should be used to switch the amplifier On or Off.
To Next Page
Loading...
