D.A.C.E SPRINT - User Manual

1
INTRODUCTION………………………………………………………….P2
LEGALREQUIREMENTSANDWARNINGS.………………………..P3
RECOMMENDEDTOOLS.……………………………………………..P3
TERMSANDDEFINITIONS.……………………………………………P4
MOTORLAYOUT.………………………………………………………..P5
SITEEVALUATION.……………………………………………………..P6
GATEEVALUATION.……………………………………………………P7
STARTUPFORCE……………………………………………………….P8
REMOVINGTHELID.…………………………………………………...P9
ANCHORINGTHEMOTOR.……………………………………………P11
SECURINGTHEMOTOR.……………………………………………...P12
MOUNTINGTHERACK.………………………………………………..P13
FILLINGTHEGEARBOXOIL.…………………………………….……P14
MOUNTINGTHEMAGNET.……………………………………………P14
MAINPCBOARDLAYOUT.………………………………………..…..P15
LCDSCREEN.……………………………………...……………………P16
SETTINGTHEMOTORDIRECTION.………………………………...P17
PROGRAMMINGTHEMOTOR.……………………………………….P18
SETTINGTHEOVERCURRENT.…………………………………….P19
PROGRAMMINGTHEREMOTES.…………………………………...P19
SETTINGAUTOCLOSETIME.……………………………………….P20
SETTINGPARTYMODE.……………………………………………...P20
TECHNICALSPECIFICATIONS.……………………………………...P21
INDEX
TRANSFORMER WIRING ……………………………………………P10

Summary

Legal Requirements and Warnings for Installing This Equipment

Site Evaluation

Gate Evaluation

Start Up Force

Removing the Lid and Placing the Motor in Manual Over-Ride

Electrical Wiring (Sprint & Condo)

Anchoring the Motor

Securing the Motor to the Foundation Plate

Mounting the Rack

Filling the Gearbox Oil

Mounting the Magnet

Setting the Motor Direction

Programming the Motor

Setting the Over-Current

Programming the Remotes

Erasing All Remotes Programmed to the Receiver

Program Remotes for Pedestrian Opening Only

Setting Party Mode (Auto-Close Overide)

Auto-Close

D.A.C.E SPRINT Specifications