D-Link DAP-1522 Xtreme N Duo - D-Link DAP-15 User Manual

25
D-Link DAP-1522 User Manual
Section 3 - Conguration
The Auto Channel Scan setting can be selected to allow the DAP-1522 to choose the channel with the least amount of interference.
Indicates the channel setting for the DAP-1522. The Channel can be changed to t the channel setting for an existing wireless network
or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.
Select the transmit rate. It is strongly suggested to select Best (automatic) for best performance.
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DAP-1522. If Invisible is selected, the
SSID of the DAP-1522 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DAP-1522 in
order to connect to it.
Refer to page 63 for more information regarding the wireless security.
Enable the Wi-Fi Protected Setup feature.
Locking the wireless security settings prevents the settings from being changed by any new external registar using its PIN.
Devices can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network
settings with Manual Wireless Network Setup, Wireless Network Setup Wizard, or an existing external WLAN Manager
Registar.
Shows the current value of the access point’s PIN.
Create a random number that is a valid PIN. This becomes the access point’s PIN. You can then copy this PIN to the user
interface of the registrar.
Restore the default PIN of the access point.
Resets Wi-Fi Protected Status to Not Configured. Vista WPS icon will only be displayed when the Wi-Fi Protected Status is
Not Congured.
Enable Auto
Channel Scan:
Wireless Channel:
Transmission Rate:
Channel Width:
Visibility Status:
Security Mode:
Enable:
Lock Wireless
Security Settings:
Current PIN:
Generate New
PIN:
Reset PIN to
Default:
Reset to
Uncongured: