D-Link DAP-1522 Xtreme N Duo - Wireless

51
D-Link DAP-1522 User Manual
Section 3 - Conguration
Wireless Mode:
Site Survey:
Enable Wireless:
Wireless Network
Name:
802.11 Band
802.11 Mode:
Enable Auto
Channel Scan:
Wireless Channel:
Transmission Rate:
Channel Width:
Select Infrastructure to connect to a wireless (AP) Access Point,
select Ad-hoc to connect to another bridge or wireless station.
A function that looks for available wireless networks.
Tick the check box to enable the wireless function. If you do not
want to use wireless, uncheck the box to disable all the wireless
functions.
Service Set Identier (SSID) is the name of your wireless network.
Create a name using up to 32 characters. The SSID is case-
sensitive.
The options include 2.4GHz, 5GHz, and 2.4GHz/5GHz. This optionThis option
is unavailable in Bridge Mode.
If all of the wireless devices in your wireless network can connect
in the same transmission mode, you can improve performance
slightly by choosing the appropriate “Only” mode. If you have
some devices that use a dierent transmission mode, choose
the appropriate “Mixed” mode. This option is unavailable in Bridge Mode.
The Auto Channel Scan setting is used to allow the DAP-1522 to choose the channel with the least amount of interference.
This option is unavailable in Bridge Mode.
Indicates the channel setting for the DAP-1522. The Channel can be changed to t the channel setting for an existing wireless network
or to customize the wireless network. This option is unavailable in Bridge Mode.
Select the transmit rate. It is strongly suggested to select Best (automatic) for best performance. This option is unavailable in BridgeThis option is unavailable in Bridge
Mode.
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Wireless