D-Link DAP-1522 Xtreme N Duo - Qos

31
D-Link DAP-1522 User Manual
Section 3 - Conguration
Enable QoS:
HTTP:
Automatic:
Add QoS Rule:
Enable QoS:
Name:
Priority:
Enable this option if you want to allow QoS to prioritize
your trac.
Allows the access point to recognize HTTP transfers
for many common audio and video streams and
prioritize them above other traffic. Such streams
are frequently used by digital media players.
When enabled, this option allows the access point to
automatically attempt to prioritize trac streams that
it doesn’t otherwise recognize, based on the behavior
that the streams exhibit. This acts to de-prioritize
streams that exhibit bulk transfer characteristics, such
as le transfers, while leaving interactive trac, such
as gaming or VoIP, running at a normal priority.
A QoS Rule identies a specic message ow and
assigns a priority to that ow. For most applications,
the priority classiers ensure the right priorities and
specic QoS Rules are not required.
QoS supports overlaps between rules. If more than one
rule matches for a specic message ow, the rule with
the highest priority will be used.
Enable this option if you want to allow QoS to prioritize
your trac.
Create a name for the rule that is meaningful to you.
The priority of the message ow is entered here. The
four priorities are dened as:
QoS
QoS is short for Quality of Service, a technology developed to enhance your experience of using a network by prioritizing the
trac of dierent applications.