D-Link DAP-1522 Xtreme N Duo - Advanced Wireless; D-Link DAP-15 User Manual

29
D-Link DAP-1522 User Manual
Section 3 - Conguration
Transmit Power:
Beacon Period:
DTIM Interval:
RTS Threshold:
Fragmentation
Threshold:
WMM Enable:
Short GI:
IGMP Snooping:
Set the transmit power of the antennas.
Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value. 100
is the default setting and is recommended.
(Delivery Trac Indication Message) 1 is the default
setting. A DTIM is a countdown informing clients of the
next window for listening to broadcast and multicast
messages.
This value should remain at its default setting of 2346.
If inconsistent data ow is a problem, only a minor
modication should be made.
The fragmentation threshold, which is specied in
bytes, determines whether packets will be fragmented.
Packets exceeding the 2346 byte setting will be
fragmented before transmission. 2346 is the default
setting.
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients.
Check this box to reduce the guard interval time therefore increasing the data capacity. However, it is less reliable and may create
higher data loss.
This enables IGMP snooping for the wireless connection. We recommend enabling this if you often use multicast services such as
video conferencing and streaming audio/video.
Advanced Wireless