D-Link DAP-1522 Xtreme N Duo - Network Settings; Static

53
D-Link DAP-1522 User Manual
Section 3 - Conguration
LAN Connection
Type:
Access Point IP
Address:
Subnet Mask:
Default Gateway:
Device Name:
Use the drop-down menu to select Static IP if your ISP
assigned you the IP address, subnet mask, gateway,
and DNS server addresses. Select Dynamic IP (DHCP)
to automatically assign an IP address to the computers
on the LAN/private network.
Enter the IP address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Enter the Device Name of the AP and click Next to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
This section will allow you to change the local network settings of the bridge and to congure the Static settings.
Network Settings
Static