Name: D-Link DAP-2660
Brand: D-Link
Rating: 5 (1 reviews)

To Next Page

To Previous Page

D-Link DAP-2660 User Manual

WMM (Wi-Fi

Multimedia):

Ack Time Out

(2.4 GHZ, 48~200):

Short GI:

IGMP Snooping:

Multicast Rate:

Multicast Bandwidth

Control :

Maximum Multicast

Bandwidth:

HT20/40 Coexistence :

WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applications over

a Wi-Fi network. This feature is enabled by default and can only be disabled when Mixed 802.11g and 802.1b was selected

as the Wireless Mode.

To eectively optimize throughput over long distance links enter a value for Acknowledgement Time Out between 48 and 200

microseconds for 2.4 GHz in the eld provided.

Select Enable or Disable. Enabling a short Guard Interval (GI) can increase throughput. However, be aware that it can also

increase the error rate in some installations due to increased sensitivity to radio-frequency installations. This option cannot be

enabled when Mixed 802.11g and 802.11b was selected as the Wireless Mode.

Select Enable or Disable. Internet Group Management Protocol (IGMP) allows the AP to recognize IGMP queries and reports

sent between routers and an IGMP host (wireless STA). When IGMP snooping is enabled, the AP will forward multicast packets

to an IGMP host based on IGMP messages passing through the AP.

Select the multicast packet data rate value here. Options to choose from are 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2 and 1

Mbps. The multicast rate is supported in AP mode, (2.4 GHZ and 5 GHZ) and WDS with AP mode, including Multi-SSIDs. This

option cannot be congured when 802.11n Only was selected as the Wireless Mode.

Select to Enable or Disable the multicast bandwidth control option here.

After enabling the multicast bandwidth control option, enter the maximum multcast bandwidth value here. By default this

value is 100 Kbps.

Enable this option to reduce interference from other wireless networks in your area. If the channel width is operating at 40MHz

and there is another wireless network’s channel over-lapping and causing interference, the Access Point will automatically

change to 20MHz

Other manuals for D-Link DAP-2660

Questions and Answers:

Need help?

Do you have a question about the D-Link DAP-2660 and is the answer not in the manual?

General

2.4 GHz	Yes
Modulation	PSK
Frequency band	2.4, 5 GHz
Number of users	- user(s)
Channels quantity	- channels
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3u
Maximum data transfer rate	1200 Mbit/s
Internal	No
Certification	FCC\\r IC\\r CE\\r UL
Security features	Network access point (NAP)
Security algorithms	64-bit WEP, 128-bit WEP, 802.1x RADIUS, SSID, WPA, WPA2
Antenna features	Integrated antenna
Antennas quantity	4
Antenna gain level (max)	4 dBi
Power consumption (typical)	11 W
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Package depth	269 mm
Package width	204 mm
Package height	64 mm
Package weight	562.5 g
Pallet width	1200 mm
Pallet length	1100 mm
Pallet height (air)	2047 mm
Pallet gross weight (air)	439460 g
Quantity per pallet (air)	480 pc(s)
Shipping (inner) case width	290 mm
Shipping (inner) case height	239 mm
Shipping (inner) case length	352 mm
Shipping (inner) case weight	4385 g
Shipping (inner) case net weight	2230 g
Number of cartons per pallet (air)	96 pc(s)
Quantity per shipping (inner) case	5 pc(s)
Harmonized System (HS) code	85176990