Web User Interface
29
Multi-SSID
This device supports up to four multiple Service Set Identiers. You can set the Primary SSID under Basic > Wireless. The SSID’s factory default setting
is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network.
Enable Multi-
SSID:
Enable Priority:
Band:
Index:
SSID:
SSID Visibility:
Security:
Priority:
WMM (Wi-Fi
Multimedia):
Check to enable support for multiple SSIDs.
Check to enable support for SSID priority level.
Select 2.4GHz or 5GHz.
You can select up to seven multi-SSIDs. With the Primary
SSID, you have a total of eight multi-SSIDs.
Service Set Identier (SSID) is the name designated for a
specic wireless local area network (WLAN). The SSID’s
factory default setting is dlink. The SSID can be easily
changed to connect to an existing wireless network or to
establish a new wireless network.
Enable or Disable SSID visibility. Enabling this feature
broadcasts the SSID across the network, thus making it
visible to all network users.
The Multi-SSID security can be Open System, WPA-
Personal, or WPA-Enterprise. For a detailed description of
the Open System parameters please go to page 23. For
a detailed description of the WPA-Personal parameters
please go to page 24. For a detailed description of the
WPA-Enterprise parameters please go to page 25.
Select the priority level of the SSID selected.
WMM stands for Wi-Fi Multimedia. Enabling this feature
will improve the user experience for audio and video
applications over a Wi-Fi network.
To Next Page
Loading...
