Web User Interface
35
Intrusion
The Wireless Intrusion Protection window is used to classify APs as Valid, Neighborhood, Rogue, or a New group. Click Save for the changes to take
eect.
Wireless Band: Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Detect: Click Detect to initiate a scan of the network.
AP List: Click the drop-down menu to select All, Valid,
Neighbor, Rogue, and New.
The following is a denition of the listed AP cat-
egories:
y Valid: An AP which is authenticated to the net-
work with encryption is classied as valid.
y Neighbor: A detected AP with a weak signal
strength is classied as a suspect neighbor.
y Rogue: An AP that has been installed on the
secure network without explicit authorization.
y New: An alternative category.
From the AP List select a detected AP and click
Set as Valid, Set as Neighborhood, Set as Rogue,
or Set as New to manually dene the category
type for the AP. Alternatively, click the radio but-
ton to mark all new access points as valid or
rogue.
To Next Page
Loading...
