Do you have a question about the D-Link DCS-2310L and is the answer not in the manual?
Maximum resolution | 1280 x 800 pixels |
---|---|
Supported video modes | 720p |
Video formats supported | H.264, M-JPEG, MPEG4 |
Supported graphics resolutions | 176 x 144, 320 x 240, 1024 x 768 (XGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 640 x 480 (VGA), 800 x 600 (SVGA) |
Minimum illumination | 0 lx |
Sensor type | CMOS |
Optical sensor size | 1/4 \ |
Optical zoom | - x |
Fixed focal length | 3.45 mm |
Video motion detection | Yes |
Password protection type | Supervisor, User |
Built-in HDD | No |
Compatible memory cards | microSD (TransFlash), microSDHC |
LED type | IR |
Night vision distance | 5 m |
Type | IP security camera |
Certification | CE, LVD, FCC, C-Tick |
Placement supported | Outdoor |
Connectivity technology | Wired |
Form factor | Box |
Product color | Black, White |
Protection features | Dust resistant, Water resistant |
International Protection (IP) code | IP65 |
Audio system | 2-way |
Cabling technology | 10/100Base-T(X) |
Supported network protocols | IPv6, IPv4, TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP/HTTPS, Samba, PPPoE, UPnP, RTP/RTSP/RTCP, QoS, CoS, IGMP |
Power requirements | 5V DC |
Compatible operating systems | Windows 7 Windows Vista Windows XP MacOS X 10.5+ |
F-number (relative aperture) | 2 |
Compliance industry standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3af |
Minimum RAM | 128 MB |
Minimum processor | 1.3GHz |
AC input voltage | 100-240 V |
DC output current | 1.2 A |
Power source type | PoE |
AC input frequency | 50 - 60 Hz |
Power consumption (typical) | 5.3 W |
Interface | RJ-45 |
Cables included | LAN (RJ-45) |
Sustainability certificates | RoHS |
Storage temperature (T-T) | -20 - 70 °C |
Operating temperature (T-T) | -25 - 50 °C |
Storage relative humidity (H-H) | 5 - 95 % |
Operating relative humidity (H-H) | 20 - 80 % |
Depth | 93 mm |
---|---|
Width | 66 mm |
Height | 138.9 mm |
Weight | 235 g |
Guides through automatic camera setup using a mydlink-enabled router.
Provides a step-by-step wizard for installing and registering the camera.
Guides through initial setup for network and motion detection settings.
Configures the camera's network connection settings via a wizard.
Guides through configuring motion detection features and schedules.
Manually configures the camera's local area network (LAN) settings.
Details how to enable and configure motion detection parameters.
Configures event triggers, actions, media, and server settings.
Updates the camera's firmware to the latest version.
Details camera hardware, image features, video compression, and resolution specifications.
Lists network protocols, interfaces, security features, and multimedia support.
Covers system requirements for web interface and mobile support.
Outlines the hardware and software warranty terms and conditions.