D-Link DCS-2310L - Page 57

57D-Link DCS-2310L User Manual
Section 4: Conguration
Preset List: To add a preset to the sequence, select it from the drop-down box at the
bottom of this window, set the Dwell time to determine how long the
camera view will stay at that preset, then click the Add button. The preset
name will appear in the list, followed by the dwell time to view that preset
for.
You can rearrange your presets in the sequence by selecting a preset in
the sequence, then clicking the arrow buttons to move it higher or lower
in the current sequence.
Clicking the trash can button will remove the currently selected preset
from the sequence.
If you want to change the dwell time for a preset, select it from the list,
enter a new dwell time, then click the Update button.