D-Link DCS-933L Cloud Camera 1150

15D-Link DCS-933L User Manual
Section 2 - Installation
Manual Hardware Installation
I you wish to set up your camera without using the Camera Setup Wizard, please ollow these steps.
Note: In order to use the mydlink eatures o this product, you will need to go through the Camera Setup Wizard or Zero
Conguration Setup.
Optional: Use WPS to Connect Wirelessly
You can use WPS to connect your camera to your network wirelessly. For more
inormation, reer to “WPS  Push Button Setup” on page 17. I your router
does not support WPS, you will still be able to set up your camera’s wireless
settings in the camera’s web interace.
Connect the Ethernet Cable
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available port on your router.
Attach the External Power Adapter
Connect the power adapter to the power connector on your camera, then
plug the power adapter into a wall outlet.
Congure Your Camera
Reer to “Conguration” on page 19 or inormation on how to congure
your camera.