D-Link DCS-933L Cloud Camera 1150

25D-Link DCS-933L User Manual 25
Section 3 - Confguration
Wireless Setup
Check this box to allow your camera to connect to your network
wirelessly.
Enter the network name(SSID) o the wireless network you want
to connect to. You can also click the Site Survey button below to
choose an available network and ll in settings automatically.
I you are using AdHoc as your connection mode, select the same
channel that is being used by your wireless network.
Select the connection mode used by your wireless network. In most
cases, you should select Inrastructure. AdHoc is only used i your
camera is directly connecting to another PC or device.
Clicking this button will allow you to select an available wireless
network to connect to, and will ll in the necessary settings or you.
Select the wireless security mode used by your wireless network. I
you select WEP or WPA-PSK/WPA2-PSK, enter the password or your
wireless network in the text box that appears.
Enable
Wireless:
SSID:
Channel:
Connection
Mode:
Site Survey:
Wireless
Security Mode:
This section allows you to set up and congure the wireless settings on your camera.