D-Link DCS-933L Cloud Camera 1150

33D-Link DCS-933L User Manual 33
Section 3 - Confguration
Mail
SMTP Server
Address:
Sender e-mail
Address:
Receiver e-mail
Address:
User Name:
Password:
This is the domain name or IP address o your external e-mail server.
This is the e-mail address listed as the sender or your notication e-mails.
This is the e-mail address that your notication e-mails will be sent to.
I the SMTP server uses authentication, enter your user name.
I the SMTP server uses authentication, enter your password.
This section allows you to congure your camera to send snapshots and video clips to an e-mail address. I you are not sure
what settings to use, check with your e-mail service provider.
For example, i you want to use Gmail with SSL-TLS or e-mail notications,
you can ollow the setup procedure as below:
Step 1 - Enter “smtp.gmail.com” in SMTP Server Address.
Step 2 - Change the SMTP server port number rom 25 to 465.
Step 3 - Enter your gmail e-mail address in Sender E-mail Address.
Step 4 - Enter the destination e-mail address in Receiver E-mail Address.
Step 5 - Enter the user name required to access the SMTP server.
Step 6 - Enter the password required to access the SMTP server.
Step 7 - Select SSLTLS and then click Save Settings.
Step 8 - Click the Test button to send a test e-mail will be sent to the e-mail
account listed above.
Note: You can also use STARTTLS, which will use SMTP server port number
587.
Note: I you want to use a Yahoo SMTP server, the SMTP server address will be dierent between each registered region, and only SMTP
port 465 is supported or SSLTLS.