D-Link DCS-933L Cloud Camera 1150

35D-Link DCS-933L User Manual 35
Section 3 - Confguration
FTP
Host Name:
Port:
User Name:
Password:
Path:
Passive Mode:
Enter the IP address o the FTP server that you will be connecting to.
Enter the port o the FTP server that you will be connecting to. The deault
is 21.
Enter the user name o your FTP server account.
Enter the password o your FTP server account.
Enter the destination path/older to save les to on the FTP server.
Enabling passive mode may help you reach your FTP server i your camera
is behind a router protected by a rewall.
This section allows you to congure your camera to send snapshots and video clips to an FTP server.
Enable the
uploading o
images to an
FTP server:
Image
Frequency:
Base File Name:
Enabling this will allow snapshots to be uploaded in dierent ways:
• Choosing Always will upload snapshots continuously based on
the Image Frequency speciied.
• Choosing Schedule will allow you to schedule when to start and
stop the uploading o snapshots.
• Select Motion/Sound Detection i you would like the camera to
upload images only when motion or sound is detected.
Select the requency you would like or your images to be taken and
uploaded. You can choose to upload by rames per second, or by seconds
per rame.
Choose a base le name or your snapshots.