D-Link DCS-933L Cloud Camera 1150

24D-Link DCS-933L User Manual 24
Section 3 - Confguration
Network Setup
Select this connection i you have a DHCP server running on your network
and would like a dynamic IP address to be updated to your camera
automatically.
You may obtain a static or xed IP address and other network inormation
rom your network administrator or your camera. A static IP address will
ease you or accessing your camera in the uture.
IP Address: The xed IP address
Subnet Mask: The deault value is “255.255.255.0.” Used to determine i
the destination is the same subnet.
Deault Gateway: The gateway used to orward rames to destinations
in a dierent subnet. Invalid gateway settings may cause the ailure o
transmissions to a dierent subnet.
Primary DNS: Primary domain name server that translates names to IP
addresses.
Secondary DNS: Secondary domain name server to backup the Primary
DNS.
I you are using a PPPoE connection, enable it and enter the User Name
and Password or your PPPoE account. You can get this inormation rom
your Internet service provider (ISP).
You may congure a Second HTTP port that will allow you to connect to
the camera via a standard web browser. The port can be set to a number
other than the deault TCP ports 80. A corresponding port must be opened
on the router. For example, i the port is changed to 1010, users must type
http://192.168.0.100:1010 instead o only “http://192.168.0.100”.
Enable this setting to congure your camera as a UPnP device in the
network.
DHCP:
Static IP Client:
PPPoE Settings:
Port Settings:
UPnP Settings:
This section allows you to congure your network settings.