D-Link DCS-933L - Configuration Settings; Web Configuration Interface

19D-Link DCS-933L User Manual 19
Section 3 - Conguration
Conguration
Using the Web Conguration Interface
AftercompletingtheCameraSetupWizard,youarereadytouseyourcamera.Thecamera’sbuilt-inWebcongurationinterface
is designed to allow you to easily access and congure your DCS-933L. At the end of the wizard, click Go To Camera or enter
theIPaddressofyourcameraintoawebbrowser,suchasInternetExplorer
®
. To log in, use the User name admin and the
password you created in the Setup Wizard. If you did not create a password, the default password is blank. After entering your
password, click OK.
Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP
is 192.168.0.20.