D-Link DCS-933L - Ddns

27D-Link DCS-933L User Manual 27
Section 3 - Conguration
Click to enable the DDNS function.
Select your Dynamic DNS Server from the pull down menu.
EnterthehostnameoftheDDNSserver.
Enteryourusernameore-mailusedtoconnecttotheDDNS.
EnteryourpasswordusedtoconnecttotheDDNSserver.
Enable:
Server Address:
Host Name:
User Name:
Password:
DDNS
This section allows you to congure the DDNS setting for your camera. DDNS will allow all users to access your camera using
a domain name instead of an IP address.