D-Link DCS-933L

22D-Link DCS-933L User Manual 22
Section 3 - Conguration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to congure
your new D-Link Camera and connect the camera to the Internet.
Click Next to continue.
Choose the Internet connection your camera should use:
•DHCP Connection (Default): If you are connected to a router, or are
not sure which connection to use, select DHCP Connection.
•Static IP Address: This will allow you to manually enter your network
settings for the camera. If you are not sure what settings to enter,
check with your Internet Service Provider or network administrator.
•PPPoE Connection: If your camera is directly connected to a DSL
modem, you may need to use PPPoE. Enter the username and
password provided to you by your Internet Service Provider.
Click Next to continue.