D-Link DCS-933L

40D-Link DCS-933L User Manual 40
Section 3 - Conguration
System
This section allows you to save and restore your conguration, restore the factory settings, and/or restart the camera.
Save To Local
Hard Drive:
Load From
Local Hard
Drive:
Restore
To Factory
Default:
Reboot The
Device:
Click the Save Configuration button to save the current camera
conguration to your local PC.
To load a previously saved configuration, click the Browse...
button, select your saved conguration le, then click the Restore
Conguration From File button.
Click the Restore Factory Defaults button to reset all settings back to
the factory defaults. Please note that this will erase any changes you
have made to the settings of the camera.
Click the Reboot the Device button to reboot the camera.