D-Link DCS-936L - System

49D-Link DCS-936L User Manual
Section 3 - Conguration
System
This section allows you to save and restore your conguration, restore the factory settings, and/or restart the camera.
Save To Local
Hard Drive:
Load From
Local Hard
Drive:
Restore
To Factory
Defaults:
Reboot Device:
Schedule
Device Reboot
You may save your current camera conguration as a le on your computer
by clicking Save Conguration.
Locate a pre-saved conguration by clicking Browse... and then restore
the pre-dened settings to your camera by clicking Load Conguration.
You may reset your camera and restore the factory settings by clicking
Restore Factory Defaults.
This will restart your camera.
You can schedule the camera to reboot according to a schedule. Select
the days and time you want the camera to automatically reboot.