31D-Link DCS-936L User Manual
Section 3 - Conguration
Network
This section allows you to congure your network settings.
Select this connection if you have a DHCP server running on your network
and would like a dynamic IP address to be updated to your camera
automatically.
You may obtain a static or xed IP address and other network information
from your network administrator for your camera.
IPv4 Address: Enter the IP address that the camera will use on your
network. You may need to get this information from your ISP or network
administrator.
Subnet Mask: The default value is “255.255.255.0.” Used to determine if
the destination is part of the same subnet.
Default Gateway: The gateway used to forward frames to destinations
in a dierent subnet. Invalid gateway settings may cause the failure of
transmissions to a dierent subnet.
Optional Primary DNS: Primary domain name server that translates
names to IP addresses.
Optional Secondary DNS: Secondary domain name server to backup the
Primary DNS.
If you are using a PPPoE connection, enable it and enter the User Name
and Password for your PPPoE account. You can get this information from
your Internet service provider (ISP).
Select Automatic IP Address to automatically get an IPv6 address from
your router. If you have a static or xed IP from your network administrator,
select Static IP address and enter the information provided by your ISP or
network administrator.
Automatic IP
Address:
Static IP
Address:
PPPoE
Settings:
IPv6 Settings:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
