D-Link DCS-936L

33D-Link DCS-936L User Manual
Section 3 - Conguration
Wireless Setup
This section allows you to set up and congure the wireless settings on your camera.
Network Name:
Site Survey:
Wireless Mode:
Security Mode:
Cipher Type:
Key:
Enter the SSID/name for the wireless network you want to connect to, or
use the Site Survey drop down menu to select an existing one.
The drop down menu lists all the wireless networks that the camera was
able to detect. Click Rescan to scan for wireless networks again.
This shows the current wireless mode being used by the camera.
For security, you can choose None or WPA-PSK / WPA2-PSK. Select the
same encryption method that is being used by your wireless device/
router.
If you chose WPA-PSK or WPA2-PSK, choose whether to use TKIP or AES.
Enter the key(password) for your wireless network. Check the Show
Hidden Key box to reveal the password you have entered.
Click the Save Settings button to save your changes.