DES-3550 Layer 2 Fast Ethernet Switch
Example usage:
To configure the traffic scheduling mechanism for each queue:
DES-3550:4# config scheduling 0 max_packet 100 max_latency 150
Command: config scheduling 0 max_packet 100 max_latency 150
Success.
DES-3550:4#
show scheduling
Purpose Used to display the currently configured traffic scheduling on the
Switch.
Syntax
show scheduling
Description
The show scheduling command will display the current traffic
scheduling mechanisms in use on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the current scheduling configuration:
DES-3550:4# show scheduling
Command: show scheduling
QOS Output Scheduling
Class ID MAX. Packets MAX. Latency
------------ ------------------- --------------------
Class-0 100 150
Class-1 99 100
Class-2 91 101
Class-3 21 201
DES-3550:4#
128
To Next Page
Loading...
