DES-3550 Layer 2 Fast Ethernet Switch
27
ARP COMMANDS
The ARP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table.
Command Parameters
create arpentry <ipaddr> <macaddr>
<ipaddr> <macaddr>
delete arpentry {[<ipaddr> | all]}
show arpentry {ipif <ipif_name 12> | ipaddress <ipaddr> | [static | local]}
config arp_aging time <value 0-65535>
clear arptable
config arpentry
Each command is listed, in detail, in the following sections.
230
To Next Page
Loading...
