D-Link DES-3550 - Connecting Devices to the Switch

DES-3550 Layer 2 Fast Ethernet Switch
6
PORT SECURITY COMMANDS
The Switch’s port security commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters)
in the following table.
Command Parameters
config port_security ports [<portlist> | all ] {admin_state [enable| disable] | max_learning_addr
<max_lock_no 0-20> | lock_address_mode [Permanent |
DeleteOnTimeout | DeleteOnReset]}
delete port_security_entry vlan_name <vlan_name 32> mac_address <macaddr> port <port>
clear port_security_entry port <portlist>
show port_security {ports <portlist>}
Each command is listed, in detail, in the following sections.
29