D-Link DES-3550 - VLAN Commands

DES-3550 Layer 2 Fast Ethernet Switch
15
VLAN COMMANDS
The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
create vlan <vlan_name 32> {tag <vlanid 1-4094> | advertisement}
delete vlan <vlan_name 32>
config vlan <vlan_name 32> {[add [tagged | untagged | forbidden] | delete]
<portlist> | advertisement [enable | disable]}
config gvrp [<portlist> | all] {state [enable | disable] | ingress_checking [enable
| disable] | acceptable_frame [tagged_only | admit_all] | pvid
<vlanid 1-4094>}
enable gvrp
disable gvrp
show vlan <vlan_name 32>
show gvrp <portlist>
Each command is listed, in detail, in the following sections.
138