DES-3550 Layer 2 Fast Ethernet Switch
Example usage:
To delete the mirroring ports:
DES-3550:4#config mirror port 1 delete source port 2-4
Command: config mirror 1 delete source 2-4
Success.
DES-3550:4#
enable mirror
Purpose Used to enable a previously entered port mirroring configuration.
Syntax
enable mirror
Description This command, combined with the disable mirror command below,
allows you to enter a port mirroring configuration into the Switch, and
then turn the port mirroring on and off without having to modify the
port mirroring configuration.
Parameters None.
Restrictions Only administrator-level users can issue this command.
To enable mirroring configurations:
DES-3550:4#enable mirror
Success.
Example usage:
Command: enable mirror
DES-3550:4#
135
To Next Page
Loading...
