DES-3550 Layer 2 Fast Ethernet Switch
show asymmetric_vlan
Purpose Used to view the asymmetric VLAN state on the Switch.
Syntax
show asymmetric_vlan
Description This command displays the asymmetric VLAN state on the Switch
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the asymmetric VLAN state cuurently set on the Switch:
DES-3550:4#show asymmetric_vlan
Command: show asymmetric_vlan
Asymmetric Vlan: Enabled
DES-3550:4#
149
To Next Page
Loading...
