D-Link DES-3550 - Errors

DES-3550 Layer 2 Fast Ethernet Switch
show ipif
Purpose Used to display the configuration of an IP interface on the Switch.
Syntax
show ipif <ipif_name 12>
Description This command will display the configuration of an IP interface on
the Switch.
Parameters
<ipif_name 12> − The name created for the IP interface.
Restrictions None.
Example usage:
To display IP interface settings.
DES-3550:4#show ipif System
Command: show ipif System
IP Interface Settings
Interface Name : System
IP Address : 10.48.74.122 (MANUAL)
Subnet Mask : 255.0.0.0
VLAN Name : default
Admin. State : Disabled
Link Status : Link UP
Member Ports : 1-26
Total Entries : 1
DES-3550:4#
160